projects/fb-dash
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Adds wiring diagram

Browse Source
This commit is contained in:
Florian Klemenz 2022-05-04 15:03:28 +02:00
parent 506af9d65b
commit 2bc504311f
1 changed files with 16 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
README.md
View File

@ -3,6 +3,21 @@ In order to setup the dashboard start with cloning this repo ;)
git clone https://git.klelifo.de/flo/fb-dash
cd fb-dash
# Connect the display to the RaspberryPi
Wire the display connector according to the connector scheme below.\
**NOTE:** The 56 Ohm resistor is suggested for safety reasons - but it also seems to work fine wihtout it
ILI9341 RaspberryPi
===============================================================
SDO/MISO ---------------------- MISO | GPIO 9 | PIN 21
LED ----------| 56 Ohm |------- PWM | GPIO 18 | PIN 12
SCK --------------------------- SCLK | GPIO 11 | PIN 23
SDI/MOSI ---------------------- MOSI | GPIO 10 | PIN 19
DC/RS ------------------------- | GPIO 24 | PIN 18
RESET ------------------------- | GPIO 25 | PIN 22
CS ---------------------------- CE0 | GPIO 8 | PIN 24
GND --------------------------- GND | | PIN 9,14,20,25
VCC --------------------------- 3,3V | | PIN 1,17
# Configure the display
@ -26,7 +41,7 @@ to get a working /dev/fb1 framebuffer device.
# Setup fbdash binary
***TL;DR** just run ```sudo apt install -y libmariadb2 && make install```
**TL;DR** just run ```sudo apt install -y libmariadb2 && make install```
After the display is setup we can build and install the fbdash binary.