fully working homeassistant integration

mqtt/1wire

@@ -1,6 +1,6 @@
 alias_001415daa6ff=Vorlauf
-alias_000802775a88=Ext_1
-alias_0008027777d5=Ext_2
+alias_000802775a88=Umgebung
+alias_0008027777d5=Rücklauf
 alias_00000614a13f=Schlafzimmer_1
 alias_00000614a9dd=Schlafzimmer_2
 alias_00042c37a7ff=Wohnzimmer_1

mqtt/mqtt

@@ -11,9 +11,9 @@
 # Prerequesite
 #apt install mosquitto-clients
 
-LC_NAME="${DEVICE_NAME,,}"
-
 # Device attriutes
+DEVICE_NAME=${DEVICE_NAME:-$HOSTNAME}
+LC_NAME="${DEVICE_NAME,,}"
 DEVICE_ID="${LC_NAME// /_}"
 DEVICE_MANUFACTURER="custom"
 DEVICE_MODEL="${DEVICE_NAME}" #"custom"
@@ -48,14 +48,14 @@ case ${SENSOR_UNIT} in
         exit 1
     ;;
 esac
-SENSOR_ID="${DEVICE_ID}_${SENSOR_TYPE}"
+SENSOR_ID="${DEVICE_ID}_${SENSOR_NAME}_${SENSOR_TYPE}"
 SENSOR_EXPIRE_AFTER_S="600"
 
 # MQTT attributes
 MQTT_CONFIG_TOPIC="homeassistant/sensor/${SENSOR_ID}/config"
-MQTT_STATE_TOPIC="${LC_NAME// //}/${SENSOR_NAME}/state"
-
-
+MQTT_STATE_TOPIC="${DEVICE_ID// //}/${SENSOR_NAME}/${SENSOR_TYPE}/state"
+MQTT_BROKER="${MQTT_BROKER:-localhost}"
+MQTT_PORT="${MQTT_PORT:-1883}"
 
 function send {
     TOPIC=$1
@@ -64,11 +64,11 @@ function send {
     echo "TOPIC=$TOPIC"
     echo "PAYLOAD=$PAYLOAD"
     if [ -n "${MQTT_USERNAME}" ] && [ -n "${MQTT_PASSWORD}" ]; then
-        mosquitto_pub -h "${MQTT_BROKER:=localhost}" -p "${MQTT_PORT:=1883}" -u "${MQTT_USERNAME}" -P "${MQTT_PASSWORD}" \
+        mosquitto_pub -h "${MQTT_BROKER}" -p "${MQTT_PORT}" -u "${MQTT_USERNAME}" -P "${MQTT_PASSWORD}" \
             -t "$TOPIC" \
             -m "$PAYLOAD"
     else
-        mosquitto_pub -h "${MQTT_BROKER:=localhost}" -p "${MQTT_PORT:=1883}" \
+        mosquitto_pub -h "${MQTT_BROKER}" -p "${MQTT_PORT}" \
             -t "$TOPIC" \
             -m "$PAYLOAD"
     fi

mqtt/send

@@ -11,27 +11,25 @@ do
     s=${s##*-}
     v=$(cat $f)
     
-    SENSORS+=("${s} ${v}")
-done
-
-for ROW in "${SENSORS[@]}"; do
-    ENTRY=( $ROW )
-    SENSOR=${ENTRY[0]}
-    VALUE=${ENTRY[1]/#[0-9][0-9]/&.}
+    SENSOR=${s}
+    VALUE=${v/#[0-9][0-9]/&.}
+    VALUE=$(echo "scale=1; (10*($VALUE+0.5))/10" | /usr/bin/bc)
 
     # Overrides SENSOR - Example: env.sensor_0_0 Batterie
     ENV_SENSOR_VAR_NAME="alias_${SENSOR}"
     ENV_SENSOR_NAME=${!ENV_SENSOR_VAR_NAME}
     
     if [ -n "${ENV_SENSOR_NAME}" ]; then
-		    echo "${ENV_SENSOR_NAME}.value ${VALUE}"
-        else
-    		    echo "${SENSOR}.value ${VALUE}"
+        SENSOR="${ENV_SENSOR_NAME}"
     fi
+
+    echo "${SENSOR}.value ${VALUE}"
+    SENSOR_NAME="${SENSOR}" SENSOR_UNIT="°C" ./mqtt ${VALUE}
 done
 
 
 
+
 #SENSOR_NAME="voltage" SENSOR_UNIT="mV" DEVICE_NAME="heat-pi ina219" ./mqtt $VOLTAGE
 #SENSOR_NAME="current" SENSOR_UNIT="mA" DEVICE_NAME="heat-pi ina219" ./mqtt $CURRENT
 #SENSOR_NAME="power" SENSOR_UNIT="mW" DEVICE_NAME="heat-pi ina219" ./mqtt $POWER